Jump to content

Jacking up your ford


Recommended Posts

Hello everyone, I'm a new member to this forum, but have been visiting the page for a while now just as a spectator. I am a senior at Kent Island High School and as a capstone project for my engineering course, I am required to invent something, or improve on a current product. I myself am in my garage working on restoring my 1976 Ford Bronco almost every day. Naturally, I wanted to improve on a garage tool, so the first thing that came to my mind was a safer jack stand. The majority of jack stand failure is due to human error, in many cases due to not using wheel chocks.

My design would feature a square base plate, to eliminate the jack sinking on soft surfaces and asphalt. I would do away with the cheap cast ratcheting mechanism, and use a safer screw system similar to those seen on an under hoist safety stand. Lastly, to encourage people to use wheel chocks, the stand would come with one that attaches to the side for safe keeping via a pin. This pin would extend through the screw shaft at the bottom, which prevents it from being raised until the pin is removed, and the wheel chock is, hopefully, installed.

The link for my short survey is below, if you have time, please take it, it will help me determine if this is a viable project. If you have any questions, comments, or suggestions, feel free to post them or message me.

Thanks everyone.

 

https://docs.google.com/forms/d/e/1FAIpQLScRWd0NHrqYqSU5gACraus168rc0fz9bJQzLgqRWR6n9-C_Xg/viewform

post-56748-0-12149400-1487684012_thumb.png

post-56748-0-69020900-1487684057_thumb.jpg

  • Like 4
Link to comment
Share on other sites

1. Cool project - Good luck

2. Really cool Bronco!

3. Took your survey - great questions, all relevant to a guy working in his garage or driveway.

4. All I ask is you manufacture your product in USA - I hate it when someone designs something but does not care enough to actually watch over it being built. I'll pay the extra few bucks when I buy them.

  • Like 1
Link to comment
Share on other sites

Welcome to the forum, and good luck with your project!

 

Oh, and your Bronco is cool. Come around more often and share more details on it.

 

As long as he doesn't spend too much time on these boards. He needs to focus on his school work! ;-)

 

Good luck with the Jack Stand, good idea. I took the survey

  • Like 1
Link to comment
Share on other sites

My contract law instructor once told the class that for the purpose of proving a design, patent, etc. is yours and created on a certain date you should mail a copy of it to yourself and keep it sealed in the envelope. The post office processing marks on the sealed envelope makes for very good evidence.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...