garyf Posted January 17, 2017 Share Posted January 17, 2017 I have a 2017 F250 Lariat Crew Diesel with Moonroof that does not have the Roof Clearance LED Lights installed. Can these be installed after and do you know what parts are necessary? We were able to do these on my 2014 with the 5 OEM lights and a harness that ran down the pillar to under the dash. Any help would be appreciated! Quote Link to comment Share on other sites More sharing options...
fordmantpw Posted January 17, 2017 Share Posted January 17, 2017 I have a 2017 F250 Lariat Crew Diesel with Moonroof that does not have the Roof Clearance LED Lights installed. Can these be installed after and do you know what parts are necessary? We were able to do these on my 2014 with the 5 OEM lights and a harness that ran down the pillar to under the dash. Any help would be appreciated! It can be done, but I think the lights require a different type of hole than before. I think they clip in to a larger hole, but not sure. Not sure about the wiring harness. Quote Link to comment Share on other sites More sharing options...
garyf Posted January 17, 2017 Author Share Posted January 17, 2017 I have done the lights on the previous model (2013 and 2015) and it was pretty straightforward with 5 oem lights and a harness you connected from above the headliner to each light, then down the pillar to a connector under the dash. I have not been able to get any insight on the 2017 and am pretty frustrated. I have spoken with 6-8 parts departments and one collision center at a Ford dealer, and no one has been able to figure this out. Has anyone done this yet? Quote Link to comment Share on other sites More sharing options...
lkbrow1 Posted February 7, 2017 Share Posted February 7, 2017 You can order the schematic from Helm Inc for $82 that will provide some insight on this. Mine will be here in a couple of weeks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.