Last engines go down the line. Vale Geelong Engine Plant.

[jpd80]

https://www.wheelsmag.com.au/news/industry/1609/ford-builds-last-aussie-engines

 

 

 

TODAY hurts.

Ford has officially signed off the last two engines to come off its Geelong production line, turning off the key on more than 90 years of history that has passed through the site.

The engines, an imported 5.0-litre V8 that’s modified here and fitted with a Harrop supercharger, and a 4.0-litre in-line six-cylinder – the most Aussie engine the carmaker builds – were commemorated in a line-off ceremony at the Geelong Powertrain Operations today.


A single image posted to Twitter shows the two engines mounted on the end of the Geelong assembly line, bearing a placard reading “Proudly built in Geelong 26 September 2016 Geelong Powertrain Operations”. Both engines are signed off with “A job well done!”

Ford Australia said the last engines were part of a staged shutdown of its Australian carmaking operations, which included the last Falcon ute rolling off its Broadmeadows production line on July 29.
“We’re obviously working towards the end of production and to support that there will be different milestones that happen along the way including the end of engine production. But all our employees will be with us until October 7, that’s when we’ll pay tribute to them on that day.”

Sherwood wouldn’t be drawn on Ford’s intentions for the engines, refusing to say whether they’re destined for use in the last Falcons to roll down the production line, or to be preserved as museum pieces.
“I’m not going to comment on that, our focus is on October and the end of local manufacturing on October 7. As I said there will be milestones along the way, and there have been already, but we really want to pay tribute to our employees and our manufacturing history on October 7.”


Ford built the factory that houses the engine plant in 1925. It was expanded in 1937, commissioned to buld Falcon engines in the late 1950s, and expanded again in 1970 to allow Ford to machine and assemble a locally made V8.
In November 1982, Ford announced it would halt V8 production, saying it would be replaced with an electronic fuel injection version of the in-line six. According to Ford, the EFI engine "offered virtually the same performance as the 4.9-litre V8 but with substantial savings in fuel consumption". It was to prove a big mistake, handing rival carmaker Holden a big marketing advantage.


FALCON ENGINES THROUGH TIME

1960: 144 cubic inch, 6cyl, ohv
1962: Pursuit 170c.i. introduced
1964: 200 Super Pursuit engine introduced
1966: 289c.i. V8 introduced as an option; 144c.i. deleted
1968: 302c.i. 4.9-litre V8 introduced; 289c.i. V8 deleted; 3.1/3.6-litre sixes introduced
1969: 351c.i. 5.8-litre V8 introduced
1970: 200/250c.i. 3.3/4.1-litre sixes introduced

1972: 302/351 Cleveland 302-2V, 351-2V 351-4V (1976-1983 4.9/5.8 4V)
1976: Crossflow heads introduced on sixes
1980: Alloy head introduced
1982: Alloy head II introduced; V8 deleted
1984: Electronic engine control IV introduced
1988: Inline sixes re-engineered for ohc
1991: 5.0-litre V8 returns
1992: 4.0-litre six introduced; XR6 joins range with Tickford-modified 4.0-litre in-line six
1994: 4.0-in-line six uprated to 157kW
1999: Ford Tickford Experience-tuned sixes, Windsor V8
2000: Engine service intervals increased from 10,000km to 15,000km
2001: Windsor 5.0-litre v8 deleted
2002: Turbo 4.0-litre in-line six introduced; "Boss 260" 5.4-litre dohc V8 introduced
2004: FPV F6 Typhoon features 270kW turbo in-line six
2005: Major changes to the in-line six for BF Falcon
2006: Six-cyl engine's thermal management overhauled for faster warm-up and better fuel use
2008: XR6 Turbo gains more torque; 310kW turbo in-line six FPV F6 introduced
2010: XR8 discontinued due to emissions controls; FPV introduces 315kW Miami supercharged 5.0-litre V8
2014: 2.0-litre four-cyl introduced for Falcon; 5.0-litre V8 returns; XR6 Sprint gains 325kW turbo six

 

 

Outside Geelong Engine

(Broad meadows Assembly North West side of Melbourne closes next week)

 

 

 

 

 

 

 

 

Last Falcon Shell followed by Last Territory Shell

 

Edited September 29, 2016 by jpd80

[silvrsvt]

What are the shells being used for? kinda odd...or they being made into full cars down the road?

[silvrsvt]

What are the shells being used for? kinda odd...or they being made into full cars down the road?

[fuzzymoomoo]

What are the shells being used for? kinda odd...or they being made into full cars down the road?

Most likely being built into full cars. IIRC they had similar ceremonial stuff for the last few Crown Vics and the old Ranger when those ended production.

[silvrsvt]

Most likely being built into full cars. IIRC they had similar ceremonial stuff for the last few Crown Vics and the old Ranger when those ended production.

 

I know when the plant my old man worked at, they built the last truck then had drawing for someone to win it...didn't have a uncompleted shell going down the line.

[Pioneer]

 

I know when the plant my old man worked at, they built the last truck then had drawing for someone to win it...didn't have a uncompleted shell going down the line.

St Paul or Edison? That sounds familiar.

[silvrsvt]

St Paul or Edison? That sounds familiar.

Edison

[akirby]

 

I know when the plant my old man worked at, they built the last truck then had drawing for someone to win it...didn't have a uncompleted shell going down the line.

 

In Atlanta the last Taurus off the line went to Truett Cathy - and founder of Chick-Fil-A. His original dwarf house restaurant was near the plant and he got a lot of business from them when he was first getting started and he always drove Fords.

 

Not as exciting as a F150 or Mustang but I'm sure it had just as much sentimental value to him. Great story.

[jpd80]

Ford hasn't said what it will do with the last two shells, they will be made into complete car so could auction them off

or place them in the Ford museum, I'm hearing that the first Falcon will probably will be going to Dearborn.

 

 

Whatever happens I hope Ford takes care of this little bit of history, we're like the far reach of old Detroit.

Edited September 29, 2016 by jpd80

[twintornados]

That I-6 would go nicely into the planned Ranger that will be built at MAP....bring the tooling to Cleveland and keep it rolling.

[jpd80]

All of theV8s are supercharged, hand built on a mini engine line and signed by the builder,

a nice touch by Ford.

 

 

 

[fuzzymoomoo]

All of theV8s are supercharged, hand built on a mini engine line and signed by the builder,

a nice touch by Ford.

 

 

 

They do the same thing in Romeo with the 5.2 FPC for the GT350.

[97svtgoin05gt]

So sad to see these wonderful engines cease production.

[Project-Fairmont]

Its really sad to see that 4.0 DOHC I-6, a direct descendant of the 1960 Falcon I-6, no longer in production. Although no loss here in North America since we haven't had a variation of that motor since the departure of the 3.3 when production of the Fairmont ended after the 1983 model year.

Edited October 6, 2016 by Project-Fairmont